Language:


Starting HansaWorld SmartApps

To start HansaWorld SmartApps on the Nokia E90, follow these steps:
  1. Insert the Nokia memory card containing HansaWorld SmartApps in your Nokia E90.

  2. After opening the Nokia E90 clamshell, press the Menu key on the keyboard:

  3. The Menu appears:

    Highlight the "Installations" folder using the silver four-way rocker key (referred to as the "scroll key" in this documentation) and open it by pressing the button in the centre of the scroll key (or the Enter key in the bottom right-hand corner of the keyboard). In this documentation, reference to the Enter key implies you can also use the button in the centre of the scroll key. The contents of the "Installations" folder are shown:

  1. In the same manner, navigate to and open the SmartApps application.

  2. If you are starting HansaWorld SmartApps for the first time, please refer to step 7 below. Otherwise, you will be asked to enter your Signature (log in ID) and password:

    Then, press the Enter key, or select Options > Login:

  1. The main Master Control panel appears:

  1. If you are starting HansaWorld SmartApps for the first time, you will be asked to enter your company name:

    Enter your company name, then select Options > Continue, or press the Shift-Enter key combination.

  1. The next step is to create a user account for yourself.

    If you will be synchronising with the database on a desktop computer, your user account must also exist on that desktop computer with the same User Name and Password.
    User Name
    Enter the name that you want to use as your log-in identity code each time you log in to HansaWorld SmartApps. You can enter up to ten characters, so you might use your initials or a short version of your name. Do not use spaces or special characters. The term "Signature" is sometimes used when referring to your User Name in the program and in this documentation.

    Full Name
    Enter your full name.

    Password, Confirm Password
    Enter to both fields the password that you will use when logging in to HansaWorld SmartApps.
    When you have entered your details, select Options > Finish. Your user account will be created.

  1. You will now be asked to log in, as described in step 5 above. After logging in, the main Master Control panel will appear. As this is the first time you have used HansaWorld SmartApps, it will only contain three icons:

---

In this chapter:

See also:
---

Go back to:

See also: